#Cisco vpn client pix software
#Cisco vpn client pix password

#Cisco vpn client pix password

radius-server host 192.168.40.5 auth-port 1645 acct-port 1646 key cisco123Įnable password 8Ry2YjIyt7RRXU24 encrypted !- Define ACS server for VPN Client user authentication. !- Encryption access-list applied to the crypto map. !- Apply crypto map on the outside interface.

crypto dynamic-map rtpmap 20Ĭrypto map rtp 5 ipsec-isakmp dynamic rtpmap !- Specify crypto map set and ISAKMP profile for LAN-to-LAN. Set isakmp-profile softclient !- Specify crypto map set and ISAKMP profile for EzVPN Client. !- Specify crypto map set and ISAKMP profile for VPN Client. crypto ipsec transform-set pix501 esp-3des esp-sha-hmacĬrypto ipsec transform-set vpnclient esp-3des esp-sha-hmacĬrypto ipsec transform-set ezvpn esp-3des esp-md5-hmac

#Cisco vpn client pix software

crypto isakmp profile ezvpnprofileĬlient configuration address respond !- ISAKMP profile specification for software VPN Client. Pool vpnpool !- ISAKMP profile specification for LAN-to-LAN. crypto isakmp client configuration group tennis !- VPN Client configuration that specifies the group, key and IP pool to use. crypto isakmp client configuration group polo !- EzVPN Client configuration that specifies the group, key and IP pool to use. !- Keyring specification for Phase 1 authentication. aaa authorization network groupauthor local !- Local authorization for EzVPN Client. aaa authentication login EZVPN localĪaa authorization exec default local !- Local group authorization for VPN Client. aaa authentication login userauth group radius local !- Local authentication for EzVPN Client. aaa authentication login default local !- RADIUS authentication for VPN Client. Username cisco password 0 letmein !- Enable AAA. Hostname VPN1750 !- Local authentication username and password, for EzVPN Client. Note: Use the Command Lookup Tool ( registered customers only) to find additional information on the commands used in this document. In this section, you are presented with the information to configure the features described in this document. Refer to the Cisco Technical Tips Conventions for more information on document conventions. If your network is live, make sure that you understand the potential impact of any command. All of the devices used in this document started with a cleared (default) configuration. The information in this document was created from the devices in a specific lab environment. The information in this document is based on these software and hardware versions:Ĭisco Secure PIX Firewall Appliance 501 that runs 6.3(3)Ĭisco Router 1750 that runs Cisco IOS® Software Release 12.3.9aĬisco Secure PIX Firewall Appliance 506 that runs 6.3(3)Ĭisco VPN Client that runs 4.0 (Rel) (User authentication using RADIUS server) There are no specific requirements for this document. The hub router is configured for local authentication for the EzVPN tunnels, and RADIUS authentication for the software VPN Client. One PIX remote site consists of LAN-to-LAN and the other consists of EzVPN Remote Access mode configuration. This document provides a sample configuration for the configuration of IPsec tunnels using ISAKMP profiles on a hub router with two PIX remote sites.